LEVELRIGHT ADJUSTABLE PADS

LevelRight is an innovative solution for operators of cranes, concrete pumps, jacking applications, and other equipment with outriggers that must be set up in locations that do not have level surfaces. Unlike standard wedges, LevelRight pads rotate to address unlevel surfaces in multiple planes.

In a single plane LevelRight operators can adjust the adaption angle from 0-10 degrees. The 24″ diameter LevelRight will accept up to a 20″ square or 24″ round outrigger float. With a rated capacity of 350,000 lbs, LevelRight can be used to help level most cranes with these size outrigger floats.

LevelRight’s built-in bubble level provides the operator with information and confirmation when they have a level surface under their equipment’s outriggers.

Designed for use with outrigger floats up to 24” diameter or 20” square.
LevelRight is designed for use with other supporting materials.
LevelRight is Patent Pending

GET A QUOTE

PRODUCT BENEFITS

Adaptable

Establishes a level platform when the supporting surface is not.

Professional

Replaces the scrap wood and risky setups. Using professional products demonstrates a professional approach.

Engineered

Top and bottom wedges rotate to ensure a level platform in two planes.

SafetyTech Material

SafetyTech material is extremely tough and durable. It is impervious to water, resistant to chemicals, and designed to never fail.

How LevelRight Works

CLICK HERE to watch a demo on how to use LevelRight Pads

How LevelRight Works

LevelRight

Equipment:
Off Rubber, Concrete Pump Trucks, Aerial Lifts, Digger Derricks, Boom Trucks, Self Erecting Tower Cranes, Mobile Substations, Rock Crushers, Scaffolding, Service Trucks, Tow Trucks, Forestry Trucks, Well Drilling Trucks, Knuckle Boom Cranes, Carrier Mounted Tower Cranes.

Typical Use:
Medium sized equipment with reaction forces up to 100,000 lbs. Stability and load distribution needs are high.

MODEL	WxLxH (in)	APPROX AREA (sq ft)	WEIGHT (lbs)	WORKING LOAD LIMIT (lbs)
FTR36-1	36×1	7	75	130,000	GET A QUOTE
FTR42-1	42×1	9.5	105	150,000	GET A QUOTE
FTR48-1	48×1	12.5	140	170,000	GET A QUOTE

Crush Rating – The maximum allowable pressure. Working Load Limit – The maximum allowable load based on the application.

MODEL	DxH (in)	AREA (sq ft)	WEIGHT (lbs)	RATED CAPACITY (lbs)	MAXIMUM ALLOWABLE PRESSURE psi
LRST-24	24 x 3.25	3	50	350,000	1,000	GET A QUOTE

LET US HELP YOU

Outrigger pad sizing is one click or call away.

GET A QUOTE

WE’LL PUT OUR MONEY WHERE OUR MOUTH IS.

Give us 30 days and we’ll give you 100% of your money back if our products aren’t fit to your specs, performing as promised or convincing you they’re the safest option out there.

We absolutely love our FiberTech Pads. They reduce manual handling on every job and have the equivalent surface area of 40 hard wood timbers. One person can roll these composite pads around with ease, which reduces the risk of short cuts compared with using timber pads.

Clinton Forner, Action Recovery Services

These FiberTech Outrigger Pads are bulletproof!

Scott Sutherland, AJ’s Concrete Pumping

I really tested these mats, constant crane relocation, heavy lift set up, trying to stabilize the ground to support all of the gross load weights. FiberTech pads made my job a lot easier and safer.

Anthony Boyd, US Army Corps of Engineers

DICA’s FiberTech Pads seem to be the perfect blend of manageable weight and good stiffness. Thanks again for a fantastic product, super happy with the pads!

Scott Sutherland, AJ’s Concrete Pumping

Our new FiberTech Outrigger Pads are working out really well. I was able to reduce my set up and tear down time by at least an hour per set up working by myself, and even faster when I had the convenience of a crew working with me.

Anthony Boyd, US Army Corps of Engineers

FREQUENTLY ASKED QUESTIONS

What size outrigger pad do I need?

Call 800-610-3422 or click here to provide your contact information. We’ll ask a few basic questions about your equipment, current products and results you’re seeing. Our team will detail the best options for you based on your equipment, application, and desired results.

What are FiberTech Outrigger Pads made of?

FiberTech Outrigger Pads are made of Fiber-Reinforce Polymers (FRP). This is a composite material made of a vinylester polymer that is reinforced with specially designed fiberglass.

Are there any chemicals to avoid when using FiberTech Outrigger Pads?

No. This is one of the significant advantages of fiberglass materials. These same materials are used in the most corrosive environments in the world and will outperform wood crane pads in the most common situations. Nothing encountered on a typical job site will have any effect on the fiberglass materials used in FiberTech Outrigger Pads.

What is the expected lifetime of FiberTech Outrigger Pads in wet or dry environments?

Wet or dry environments have no effect on our fiberglass materials and will not limit their service life. The same material is utilized for applications in submerged salt water and extremely dry desert environments. The typical failure of these pads would be from damage during handling. You can expect 20+ years of service life from FiberTech Outrigger Pads.

Are FiberTech Outrigger Pads susceptible to UV deterioration?

UV will not affect the structural integrity of the crane mats for at least 40 years. The resins in the crane mats have UV inhibitors that greatly slow UV degradation. We also apply a secondary coating that also has extremely good UV stabilization.

How do FiberTech Outrigger Pads compare to wood outrigger pads?

Wood is a natural material with a very high absorption rate. Due to absorption, wood fibers will splinter crack and break and have large variations of strength, stiffness, and reliability under pressure. All of which leads to unsafe conditions. In comparison, FiberTech Outrigger Pads constructed of FiberReinforced Polymers are virtually impervious to absorption and have reliable molecular, strength and stiffness properties.

What are the minimum and maximum temperature operational ranges of FiberTech Outrigger Pads?

-40°F to 131°F / -40C to +55C. FiberTech Outrigger Pads will work outside this range, but there will begin to be a reduction in performance. Please contact us if this is a concern for you.

Do your outrigger pads conduct electricity or create static electricity?

No. please see our outrigger pad usage and inspection guidelines page.

Are your outrigger pads for bucket trucks resistant to water and chemicals?

Yes, they are impervious to water and resistant to chemicals commonly found on construction sites, parking areas and roads. Please contact us if you are concerned about a particular chemical.

I’ve heard you sometimes recommend neoprene under your crane pads, why?

Neoprene is a fantastic solution for all of our load distribution products. It allows our products to flex a little on hard surfaces which allows for significantly improved load distribution.

Sign Up for DICA’s Monthly Newsletter

ABOUT US

DICA is a family-owned and operated company that specializes in building high performance engineered outrigger pads, crane pads, cribbing blocks and magnetic sling protectors that are lightweight, easy to use, and long-lasting.

DICA products are proudly Made in the USA, ASME B30.5 compliant and used by operators on all seven continents and 50+ countries around the world.

CONTACT US

Email
Contact Us
sales@dicausa.com

Call
Toll Free: 800-610-3422

Company Headquarters
4101 120th St.
Urbandale, IA 50323